ESP8266 - WS2812 LED Driver Board With WLED

A 1 Channel Pixel driver driver board with WLED pre-installed and 3-way male connector for LED strips.

Wemos D1 Mini - WS2812 LED Driver Board

A 2 Channel Pixel driver board for a ESP8266 Wemos D1 Mini Board.

Node-MCU - WS2812 LED Driver Board

A 2 Channel Pixel driver board for a ESP8266 Node-MCU Board.

Wemos ESP32 - WS2812 LED Driver Board

A 4 Channel Pixel driver board for a Wemos ESP32 Board.

Node-MCU ESP32 - WS2812 LED Driver Board

A 4 Channel Pixel driver board for a 30 Pin Node-MCU ESP32 Board.

Node-MCU ESP32 - WS2812 LED Driver Board

A 4 Channel Pixel driver board for a 38 Pin Node-MCU ESP32 Board.

ESP8266 - WS2812 LED Driver Board With WLED

A 2 channel LED pixel driver with WLED pre-installed.

Pixel Power Breakout Board

Comming Soon
A power distribution board for 4 channels of addressable LED strips. Each channel has a fuse and power indicator

ESP32 - WS2811/WS2812 LED Driver Board

A Pixel driver board with an ESP32 module and pre-installed WLED. Universal input voltage 5/12V no links to set. 5V line driver outputs for data, with 4 channels. IR receiver and Audio input connector.

ESP32 - WS2811/WS2812 LED Driver Board

A Pixel driver board with an ESP32 module and pre-installed WLED. Universal input voltage 5/12V no links to set. 5V line driver outputs for data, with 4 channels. IR receiver and Audio input connector.

ESP32 - WS2811/WS2812 LED Driver Board

A Pixel driver board with an ESP32 module and pre-installed WLED. Universal input voltage 5/12V no links to set. 5V line driver outputs for Data and Clock. IR receiver and Audio input connector

WT32-ETH01 - WS2811/WS2812 LED Driver Board

A Pixel driver board with an WT32-ETH01 module. Four LED driver outputs plus a Relay. Ideal for use with WLED

Note: The WT32-ETH01 board does not have an onboard USB port. To program you will need an external USB to Serial adaptor.

WT32-ETH01 - WS2811/WS2812 LED Driver Board

Comming Soon
A Pixel driver board with an WT32-ETH01 module. Eight LED driver outputs plus a Relay. Ideal for use with WLED

Note: The WT32-ETH01 board does not have an onboard USB port. A on-board USB to Serial Interface is provided.

ESP32 - WS2812 LED Driver Board With Buck Regulator

Comming Soon
A Pixel driver board with an ESP32 Wemos D1 Module. Plus a high power buck regulator to power the board and 5V LED strips, all from a 12-24V supply. 5V line driver outputs for Data and Clock.

ESP32 - WS2811/WS2812 LED Driver Board

A Pixel driver board for the Wemos ESP32 module. Universal input voltage 5/12V no links to set. Four outputs with 5V line drivers for Data and Clock. IR receiver and Audio input connector. Also a relay for control of external low volatge circuits

Wemos ESP8266 or ESP32 - WS2811/WS2812 LED Driver Board

This board connects the popular Wemos D1 Mini to the very popular WS2811/2812 LED strips.
The board has a 3.3V to 5V line driver for the data and 5V regulator for use with 12V LED strips.

Wemos ESP32 - WS2811/WS2812 LED Driver Board

This board connects the popular ESP32 Wemos D1 Mini to the very popular WS2811/2812 LED strips.
The board has a 3.3V to 5V line driver for the data and 5V regulator for use with 12V LED strips.

Wemos ESP8266 - WS2811/WS2812 LED Driver Board

This board connects the popular ESP8266 Wemos D1 Mini to the very popular WS2811/2812 LED strips.
The board has a 3.3V to 5V line driver for the data and 5V regulator for use with 12V LED strips.

ESP-01 - WS2811/WS2812 LED Driver Board

This board connects the popular ESP-01 to the very popular WS2811/2812 LED strips.
The board has a 3.3V to 5V line driver for the data and 3.3V regulator for the ESP-01

Wi-Fi PWM LED Driver Board

This board connects the popular Wemos D1 Mini or ESP12 Wi-Fi modules to RGB or RGBW LED strips.
The board has a 3.3V regulator for the ESP modules